Development of an educational module for electrical engineering courses using additive manufacturing
DOI:
https://doi.org/10.70208/3007.8245.v6.n1.327Keywords:
additive manufacturing, design, educational module, electrical circuits, 3D printingAbstract
This paper presents the development and manufacture of an educational module designed to facilitate instruction through practical experiments in the field of electrical circuits, using 3D printing techniques based on Fused Filament Fabrication. The design is based on an outdated commercial model, with the aim of offering replacement options for equipment in mechanical engineering laboratories, specifically in the electrical sector. The design process is detailed, applying mechanical engineering principles and focusing on accelerated prototyping. The module was modeled in AutoCAD 2025 in its student version, prepared for printing in Creality Print, and produced with an ENDER-3 V3 SE printer using polylactic acid filament. The final characteristics of the module created are included, along with the printing parameters that facilitated the production of a working device.
References
Alfattni, R. (2022). Comprehensive study on materials used in different types of additive manufacturing and their applications. International Journal of Mathematical, Engineering and Management Sciences, 7(1), 92-114. https://doi.org/10.33889/IJMEMS.2022.7.1.007
Brito, A. (2024). AUTOCAD Y AUTOCAD LT 2025: Guía de inicio rápido. B3DA Learning.
Camburn, B., Viswanathan, V., Linsey, J., Anderson, D., Jensen, D., Crawford, R., Otto, K., Wood, K. (2017). Design prototyping methods: State of the art in strategies, techniques, and guidelines. Design Science, 3, e13. https://doi.org/10.1017/dsj.2017.10
Chen, Y., Ku, N., Lin, B., Sun, J., Wang, A., & Montclare, J. K. (2025). Tangible 3D-printed educational aids: Enhancing conceptual understanding of circuit construction fundamentals. Discover Education, 4(1), 98. https://doi.org/10.1007/s44217-025-00493-8
FDM - Modelado por deposición fundida, https://www.3ds.com/es/make/service/3d-printing-service/fdm-fused-deposition-modeling (diciembre, 2021).
Festo Didactics, https://labvolt.festo.com/Website/solutions/6_electricity_and_new_energy/50-8353-00_transformer (septiembre, 2025).
Garcia-Dominguez, A., Claver, J., Camacho, A. M., Sebastian, M. A. (2020). Analysis of general and specific standardization developments in additive manufacturing from a materials and technological approach. IEEE Access, 8, 125056-125075. https://doi.org/10.1109/ACCESS.2020.3005021
Gibson, I., Rosen, D. W., & Stucker, B. 2015. Additive manufacturing technologies: 3D printing, rapid prototyping and direct digital manufacturing; New York, NY. Springer.
Kelley, T. R., Knowles, J. G. (2016). A conceptual framework for integrated STEM education. International Journal of STEM Education, 3(1), 11. https://doi.org/10.1186/s40594-016-0046-z
Moran, M., «Educación», Desarrollo Sostenible, https://www.un.org/sustainabledevelopment/es/education, (noviembre, 2025).
Pronaces (2025). Programas Nacionales Estratégicos, SECIHTI, https://secihti.mx/pronaces , (noviembre, 2025).
Rana, B., Rathore, S. S. (2023). Industry 4.0 – Applications, challenges and opportunities in industries and academia: A review. Materials Today: Proceedings, 79, 389–394. https://doi.org/10.1016/j.matpr.2022.12.162
Saleh Alghamdi, S., John, S., Roy Choudhury, N., Dutta, N. K. (2021). Additive manufacturing of polymer materials: Progress, promise and challenges. Polymers, 13(5), 753. https://doi.org/10.3390/polym13050753
To, T. T., Al Mahmud, A., & Ranscombe, C. (2025). A framework for integrating additive manufacturing into engineering education: Perspectives of students and educators. European Journal of Engineering Education, 50(2), 298-319. https://doi.org/10.1080/03043797.2024.2358368
To, T. T., Al Mahmud, A., & Ranscombe, C. (2023). Teaching sustainability using 3d printing in engineering education: An observational study. Sustainability, 15(9), 7470. https://doi.org/10.3390/su15097470
Tseng, T., & Kawahara, Y. (2021). Circuit assemblies: Electronic modules for interactive 3d-prints. Designing Interactive Systems Conference 2021, 1115-1128. https://doi.org/10.1145/3461778.3462024
Vukašinović, V., Gordić, D., Šušteršič, V., Josijević, M., & Nikolić, J. (2024). The implementation of 3d printing in engineering education in the field of hydraulic and pneumatic components. 3D Printing and Additive Manufacturing, 11(4), e1670-e1678. https://doi.org/10.1089/3dp.2023.0059
Wickert, J. A., Lewis, K. E. (2013). An introduction to mechanical engineering (3rd ed.). Cengage Learning.
